<button id="qikji"></button>
      1. <li id="qikji"><tr id="qikji"></tr></li>

        1. <progress id="qikji"></progress>
        2. Welcome to Guangzhou Shengfeng Hardware Co.,Ltdwebsite!

          ?
          Hot Products
          Contact us
          Hotline
          020-34831869
          Address:No. 5, West Village, Shawan Town, Shawan Town, Panyu District, Guangzhou
          Location: > english > Product > Rivers >
          DSO, embossing nut column DSOS embossed stainless steel nut column, squeeze the stud
          Auther: Pubdate:2018-09-19
           
          Pressure lo


          Joint for embossing nut column, also called the fastening screw.Models for the DSO and DSOS. Often installed on the environment near the plate edges
          Model: DSO carbon steel, DSOS stainless steel
          Head is indented, USES the garland rod production or USES the automatic lathe embossed finish.
          Are often attached to the surface under the two type of DSO embossing and DSOS stainless steel pressure flower screw extrusion nut column column of the specifications of the table, the more other specifications can produce according to customer's thickness and plate aperture.
          Stainless steel pressure flower screw

          DSOS stainless steel flower screw column pressure, extrusion type nut column
          Adapter fasteners - from the material divided into DSO, embossing nut column DSOS embossed stainless steel nut column
          DSO for carbon steel galvanized knurl nut column, DSOS flower screw for the stainless steel pressure column
          Left for a stainless steel embossing nut sample specifications: DSOS - M3-7
          Its products encoding example: ZI DSO - 440-440
          On behalf of the carbon steel embossing, nuts, thread for the American 4 # - 40 teeth, length is 0.25 inch, surface area for the blue white zinc 
          DSO pressure lo

          DSO embossed nut column
          Blue white zinc plating specification DSO M4-6 surface
          Only the M3 or 4 # in the table below - 40 threads, thread actually from M2 ~ M8 DSO style nut column can be production.
          Also to produce according to customer's drawings or design production according to customer thickness plate hole
          DSO embossing nut column, the installation of the interface to provide cost-effective solutions to party, installation quick and concise
          The DSO DSOS standards and specifications
          Pass pass DSO DSOS embossing nut column drawings:
          Squeeze the stud DSO
          Metric specifications embossed nut column DSO specifications size table: MM
          Thread * pitch Model TYPE Threaded code C
          0.08
          H ±0.02 The length of the code
          LENG TH CODE "L" +0. 05-0.13
          The minimum thickness Plate aperture
          + 0.08
          The minimum margins
          Carbon steel Stainless steel
          M2*0.4 DSO DSOS M2 4.18 5.2 3 4 5 6 7 8 9 10

          1.0

          4.2

          6.0
          M2.5*0.45 DSO DSOS M2.5 3 4 5 6 7 8 9 10 of 12
          M3*0.5 DSO DSOS M3 6.18 7.2 3 4 5 6 7 8 9 10 11 12 13 14 15 6.2 7.0
          M3.5 4.18 5.2 3 4 5 6 7 8 9 10 11 12 13 14 15 4.2 6.0
          M4*0.7 DSO DSOS M4 7.18 8.2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
          7.2

          8.2
          M5*0.8 DSO DSOS M5 3 4 5 6 7 8 9 10 11 12 13 14 15 16
           
          American specifications of DSO DSOS pressed flower screw column size table: units (inches)
          Thread sizes Model TYPE Threaded code The length of the code The minimum thickness Plate aperture C H L The minimum margins MIN. DIST
          HOLE C/L TO EDGE
          THREAD SIZE HOLE SIZE IN SHEET
          Carbon steel Stainless steel THREAD CODE LENGTH CODE MIN SHEET THICKNESS NOM 002 +.
          STEEL SST 003 +. Max - 005.
          . 112-40 (# 4-40) DSO DSOS 440 250 , 037-037 166. 165. 194. 250. 126.
          275 275.
          DSO class flower screw column pressure embossing round head, to the size of the minimum margin requirement is less than the pressure riveting screw hex head type, can be seen from the chart, the pressure of DSO class flower screw column, the minimum margin less than SO, BSO class hexagonal pressure riveting nut column, the minimum margins, in the case of M3, DSO - 3.2 M3 minimum margin, andSO turret press studThe minimum margin of 6.0 MM
          BDSO BDSOS blind hole pressure flower screw standard and specification
          Drawing:
           
          Specification:
          Thread * pitch Model TYPE Threaded code C
          0.08
          H ±0.02 Length L + 0. 05-0.13
          (depth of thread F + 0.1)
          The minimum thickness Plate aperture
          + 0.08
          The minimum margins
          Carbon steel Stainless steel
          M2*0.4 BDSO BDSOS M2
          4.18

          5.2


          6
          3.0


          8
          4.0


          10
          4.0


          12
          5.0


          14
          6.5


          16
          6.5


          18
          9.5


          20
          9.5


          1.0

          4.2

          6.0
          M2.5*0.45 BDSO BDSOS M2.5
          M3*0.5 BDSO BDSOS M3 6.18 7.2 6.2 7.0
          M3.5 4.18 5.2 4.2 6.0
          M4*0.7 BDSO BDSOS M4 7.18 8.2
          7.2

          8.2
          M5*0.8 BDSO BDSOS M5

          The installation of embossing nut



          DSO extrusion stud installation schematic diagram

          1. The diameter of the mounting holes must match with the product.
          2. Does not allow for secondary processing, such as deburring.
          3. According to the picture on the right shows, install fasteners through the hole and into the mold.
          4. In the case of parallel to the upper die and lower die, exert certain extrusion, install the stud to the plate, after the installation, screw head plane and install board face flush.
          5, it is suggested that using the pressure riveting machine installation

          Use of material and surface treatment
          A series of The screw thread Fastener raw materials Surface treatment standard The stiffness of the mounting plate
          DSO 440/ M3 Carbon steel 1215 Galvanized/surface treatment code: ZI Rockwell hardness is not more than 80 B
          DSOS 440/ M3 SUS303 passivation Rockwell hardness is not more than 80 B
          Chemical composition:
          The product type The material of use The element name and chemical composition (%)
          Carbon (C) Manganese (Mn) Silicon (Si) Phosphorus (P) Sulfur (S) Nickel (Ni) Molybdenum (Mo) Chromium (Cr)
          DSO 1215 0.09 or less 0.75 to 1.05 0.10 or less 0.04 to 0.09 026-0.35      
          DSOS SUS303 0.15 or less 2.00 or less 1.00 or less 0.20 or less 0.15 or less 8.00 to 10.00 0.60 or less 17.00 ~ 19.00
          The performance data of the products
          Used in thickness. 040 "5052 - H34 aluminium plate:
          The screw thread
          coding
          Maximum record form a complete set screw fastening torque value
          (in.lbs.)
          The installation force
          (lbs.)
          Launch force
          (lbs.)
          Torsion output
          (in.lbs.)
          440 3.8 1000 50 10

          Used in thickness. 040 'cold rolled steel sheet
          The screw thread
          coding
          Maximum record form a complete set screw fastening torque value
          (in.lbs.)
          The installation force
          (lbs.)
          Launch force
          (lbs.)
          Torsion output
          (in.lbs.)
          440 3.8 1000 75 10

          Used in the thickness of 1 mm 5052 - H34 aluminum plate
          The screw thread
          coding
          Maximum record form a complete set screw fastening torque value
          (N.m)
          The installation force
          (KN)
          Launch force
          (N )
          Torsion output
          (N.M)
          M3 0.44 4.5 223 1.1

          Use when thickness of 1 mm cold rolled steel sheet
          The screw thread
          coding
          Maximum record form a complete set screw fastening torque value
          (N.m)
          The installation force
          (KN)
          Launch force
          (N)
          Torsion output
          (N.M)
          M3 0.44 5.5 334 1.1
          A larger display





        3. 上一篇:沒有了
        4. 下一篇:沒有了
        5. ? 操逼电影欧美精品,亚洲欧美韩A∨高清,亚洲欧洲另视频_第一页
          <button id="qikji"></button>
            1. <li id="qikji"><tr id="qikji"></tr></li>

              1. <progress id="qikji"></progress>